You are here:

How to Choose Right Raised Floor for Different Applications

With the development of the economy, the amount of the computer rooms is increasing. Therefor, the demand of anti-static raised floor also increased. The company of anti-static raised floor grows well. The competitiveness is also becoming fiercer and fiercer. How to choose the right raised floor for different raised floor applications become a problems for some purchaser.

So how to choose raised floor when we purchase raised floor, in the face of complex market and uneven quality of raised floor?

raised floor application

Thickness of steel plate

The bearing of steel raised floor mainly depends on the thickness of steel plate, and It also determines the cost. The accessories of raised floor also has the difference.

Raised floor applications:

1. The area of room is less than 20m2, the height within 20cm
Because of the small area, the height of finished surface is within conventional range, so we can choose 600*600*30mm raised floor. The raised floor of 30mm thickness is able to meet the force and bear of these rooms. The cost performance is also the best at this time.

2.  The area of room is less than 20m2, the height above 20cm
Although the room area is small, but the height of finished surface is beyond the normal range. In order to avoid the shaking phenomenon, we suggest to choose 600*600*35mm steel anti-static raised floor, which has higher stability.

3. The area of room is more than 20m2
We suggest to use 600*600*35mm anti-static raised floor for these big rooms. The bigger room is, the higher pedestal is, the higher specifications of anti-static raised floor we suggest.

raised floor

Veneering

Anti-static raised floor is covered with veneer which has a good performance in wear-resistant. In addition, there are two kinds of veneers which is widely used in our common life. They’re HPL (melamine) veneer and PVC veneer. Both of them have good anti-static features, especially the HPL veneers are widely used.

Raised floor applications:

1. HPL: High wear resistance and anti-static veneer
Widely used in control room, laboratory, university, computer room, financial system digital library, war industry, television, electronic system, monitoring room, dispatching, data center and places where require anti-static environment, it can also used as outdoor ground decoration materials.

2. PVC: High conductive anti-static veneer
Widely used in electronic workshop, clean workshop, microelectronics workshop, hospital and places where require anti-static environment.

veneer

Raised floor accessories

Finally, we need to pay attention to the floor accessories. People will feel unstable when walk on the floor with thin pedestals and stringers.

raised floor pedestal

To sum up, customers should pay attention to the above three points (the thickness of steel plate, veneers and accessories) when choosing anti-static raised floor.

Table of Contents